|
|
Charge to DeltaTron Converter -
Type 2647
Types 2647-A, B, C and D are Charge to DeltaTron Converters intended to connect charge transducers to DeltaTron inputs.
Types 2647-A, B and C support IEEE 1451.4 "A Smart Transducer Interface for Sensors and Actuators” and contain a unique identification code and TEDS.
Fonctionnalités
- Enables charge transducers to be used on DeltaTron power supplies. Compatible with ICP®, ISOTRON®, PIEZOTRON®, CCLD, etc.
- May also be used with any DeltaTron conditioning amplifier that does not support IEEE 1451.4
- Supports ®Smart Transducer Interface” IEEE 1451.4 containing TEDS (Transducer Electronic Data Sheet)
- Fixed sensitivity:- 2647-A, 2647-D, 1 mV/pC- 2647-B, 10 mV/pC– 2647-C, 0.1 mV/pC
- Supports ®Smart Transducer Interface” IEEE 1451.4 containing TEDS
- Active mode with two gain settings
- Passive mode allows connection of up to 4 units in parallel
- Setup and measurement time is reduced
- Fewer instruments in users instrument pool
- Enables plug and play between charge transducers/converter pairs
- Easier field installation and configuration
- Charge transducers can be given identification via TEDS
- Reduces human errors during measurements
- Individual production/calibration data stored in TEDS Type No. Gain (mV/pC) Extended Functionality Lower Limiting Frequency(–10%, –1 dB) Upper Limiting Frequency(–10%, –1 dB) 2647 1 & 10 Yes 0.17 Hz 50 kHz 2647-A 1 No 0.17 Hz 50 kHz 2647-B 10 No 0.17 Hz 50 kHz 2647-C 0.1 No 1.0 Hz 10 kHza 2647-D 1 No 1.0 Hz 10 kHz11Depends on input load capacitance. Figures apply to 1.5 nF (for example, 1 nF accelerometer capacitance plus 5 m cable)
|
|
