LAN-XI - 5-module and 11-module frames, Battery Module
5 and 11-module LAN-XI Front-end Frames Type 3660-C and Type 3660-D
Features
- 3660-C houses up to 5 input/output modules (up to 30 channels)
- 3660-D houses up to 11 input/output modules (up to 66 channels)
- Robust casing for industrial and hard everyday use
- Mains (90 – 264VAC, 47 – 63 Hz), DC powered (10 – 32 V) or Battery (Optional)
- Silent operation (cooling fans turn on only at maximum safe temperature)
- Phase- and sample-synchronous measurement with other front-ends including IDAe
- Plug and play modules can be removed for field measurements using a single module or swapped for calibration or repair
- Modules can be locked or screwed in place
A Type 3660-C or 3360-D is a data acquisition system comprising a frame that contains modules that can be freely chosen from the available I/O modules (see Product Data Sheet Fig 1 and Table 1). With a 1-gigabit LAN backbone, the frame provides full throughput of all channels. With synchronisation cables, the frame is compatible with IDAe hardware, maintaining phase and sample-synchronous measurements of inputs.
Power Supply
Types 3660-C and 3660-D both have an integral transformer for connecting a 90 - 264VAC, 47 - 63Hz mains power supply or can be powered from a 10 - 32V DC supply. In addition, each frame can house up to two Battery Modules Type 2831, which are capable of powering nine input/output modules for up to 40 minutes. Batteries can be hot-swapped to extend operation time. Frames cannot be powered by PoE.
DC Output and Additional PoE Ethernet Port
Types 3660-C and 3660-D have a 12V DC, 1A output (EIAJ-05 connector) with current protection to provide power for accessories such as a LAN switch for interconnecting more front-ends or wireless LAN for remote control. Cables for these accessories must be purchased separately.
The frames also include a second PoE Port for power and to connect to wireless access points (WAP) and cameras that support PoE.
Silent Operation, Cooling
Operation is silent as long as the temperature of the unit is within safety limits. If the maximum safe operating temperature is reached, cooling fans activate. The SPL is <30 dB at 1m.
Battery Module Type 2831-A
The battery module is a rechargeable Li-Ion battery with an output voltage of 14.8 V and a capacity of 6400 mAh. This provides over seven hours of operation with a single LAN-XI module or over 40 minutes in a Type 3660-D LAN-XI Frame. Two Type 2831-A batteries can be used simultaneously in a Type 3660-D to provide over 80 minutes of continuous battery power for a full frame.
Type 2831-A also acts as an uninterruptable power supply (UPS) for a frame or single module when connected to it by the included ZH-0686 single-module-to-battery power adaptor. This allows the battery to seamlessly power the module or frame if external power is temporarily lost (e.g., in a car when the ignition switch is turned).
On the front panel, five LED status indicators show the remaining capacity. When a battery is used in a LANXI frame, charging status and remaining capacity can be checked via software.
The battery module can be charged in a LAN-XI frame (when mains powered) or with a dedicated external charger. The Type 2831-A battery includes a mains powered external charger, ZG-0469. An optional DC external charger (e.g., in-vehicle charger) is also available as ZG-0858.
The battery module is the same size as a standard LAN-XI input/output module.
